Wanted MZ TS150 any condition as long as it’s in one piece.
Also for sale mz ts250 engine 4speed.rebuilt a few years ago.starts and runs well.
£350.
Pick up only.
Tel Roy 07789903590
Wanted MZ TS150 & TS250 engine for sale
Leave a reply
Category Archives: Wanted
TS250 Tank Rubbers and S/arm thrust washers needed
Does anyone have spare a couple of the front rubber mounts for the fuel tank. The ones that fit over two spindles on the frame.
Also need 3 of the 18mm trust washers that locate the swinging arm spindle.
Thanks peterF – starfield181 at gmail dot com or 01225 763567
front crash bars wanted for a supa 5
Wanted front crash bars for a Ts 250/1
07986352589
Thanks
Just got a RT 125 project
Just picked this little beauty up and I’m in need of a few bits so if anyone has anything knocking around please let me know.
Thanks
Leigh
TS250/1 Legshields Wanted
I’m looking for a set of legshields including frames and fittings for my TS250/1 – I’m determined to give it a full year of riding including my winter commute!
Contact James Suttie on 07427655126 or jamessuttie[at]fastmail[dot]com
1996 301 MZ electronic ignition part required
I own a 1996 301 MZ with the electronic ignition setup. I am after the small aluminium box shaped item which has a red resin front that is located on the stator body. I believe it is a voltage regulator. Has anyone got a spare one that they are willing to part with. My contact details can be found under, NW England section rep, in the MZ Rider magazine.
Dave Gillespie
TS 125/150 Engine
Looking for a spare engine for my TS 125, in near enough complete but not necessarily running order.
I basically want to use this as a spare engine for my TS 125 just in case anything major happens, but also to teach myself the inner workings of the engine, how to rebuild it, etc in my own time without having to take my bike off the road.
Based in Southampton, and also regularly up near Gatwick, call on 07982 677 770 (text if there’s no answer) or email tudge12@gmail.com
Etz 300 engine
Wanted Etz 300 engine if anyone can help
Based in East Yorkshire , 07986352589
Thanks
MZ Side stand wanted
Does anyone have a spare MZ sidestand knocking about at home. I would prefer it to be unmodified and in reasonable condition ie not bent! Failing that has anyone got just the side stand bracket that they are willing to part with.
I can be contacted either by email davidgillespiemz@hotmail.com or 0151 474 1877 ( evenings would be better). Thanks Dave Gillespie
TS 150 Engine
Looking for a TS 150 engine in any condition if complete (or very nearly complete)
Andy – 07967 586149
TS150 crank wanted.
A friend of mine in my local club is looking for a later type TS150 crank, with the larger crank pin. He doesn’t mind if it needs rebuilding.
Contact Keith, phone no 07979525788
email keithwells95@googlemail.com
250 TS or ETZ wanted
Hi, I’ve just joined the club and looking forward to meeting some MZ enthusiasts. I now need a bike and would like 250 TS or ETZ, preferably in the Bristol or South West area, but will travel for the right bike. I don’t mind if it needs some work but would like it to be complete. Any help appreciated.
Thanks
Andy
Wanted ETZ301 engine or complete bike
Wanted
ETZ301 engine or complete bike. Any condition considered.
John 07599087232
MZ ETZ 250 & Dart sidecar
I am in need of some parts from the front headstock mounting to mate a Squire Dart to my ETZ. I have the rear mount and lower mount, and even some of the front mount. I need the headstock rod, stepped spacers, and the unidentified gubbins that supports the lower bearings in the mount and stops the main plate revolving. Just stalled on the above.
Please!
TS125 carb wanted
TS125 carb wanted . The bike is a 1982 but registered in 84. Good carb wanted that is ready to use. Please contact me via this message or grahampetruckevitch@gmail.com
Cheers guys
TS125 rear sprocket cover wanted
Morning all
I am after a rear sprocket cover. My daughter’s T’S 125’s current cover has a nasty crack in it. Used is okay and an orginal would be great.
Graham
ETZ 250/300 and ETZ 125 Wanted
MZ ETZ 250/300 wanted, and also MZ ETZ 125 for learner rider, anything considered. Please tel 01915481039 or email dgw2194@gmail.com
David Watson
Hi all,
I’m looking for a ETZ 150 barrel and head, condition of the bore not important. Be glad to hear from you if you have, 07762285153.
Wanted – TS 125 Crankshaft
Hi.
I’m looking for a TS125 Crankshaft, the late type with 20mm journals and a needle roller small end.
Has anyone got one spare?
Thanks
Ollie
TS 250/1 bottom end wanted
I am looking for a five speed bottom end, I don’t need, barrel, head etc I want it to rebuild the gearbox as a spare bottom end, there is bound to be one in Scotland, within reasonable striking distance of Dumfries Thanks, Ron Hart 01387 720017