For sale
3 old British spotlights
7″ Lucas. Chrome. £12
5.75″ Lumax CD9. Chrome rim, black back.£8
5.75″ Butlers. Repainted white with black rim.£8
Pair of Ring (made in GDR!) car spotlights, round. New,boxed. £10
Pair of Niox car spotlights, rectangular.£5
Martin Grimshaw, Peterborough
mpgrimshaw25@gmail.com
Can be collected from Peterborough or Kettering
For Sale
ETZ 125/150 petrol tank. No dents. Used to be blue before most of the paint burned off. £20
ETZ 125/150 petrol tank. Shallow dent on offside. Used to be black before most of the paint burned off. £10
ETZ round rear lamp lens. New. £10
Simson headlight complete. VGC. £10
ETZ 250 exhaust downpipe. New, but imperfect chrome. £10
Martin Grimshaw, Peterborough
mpgrimshaw25@gmail.com
Spares can be collected from Peterborough or Kettering
Hi there,
Does anyone have an engine stand for a TS250/1 that they’d like to sell. I’m rebuilding the engine (engine out) and would like to keep it stable on my bench.
Respond to this post or call me on 07539587452.
Cheers
Gordon
This post is on behalf of a non-member (but former MZ rider).
For Sale: Complete rear wheel from MZ 250 (1991), with 110/80/16/55S tyre. Bought as seen £70
Charles L Watt
18, Croft Avenue
Dunning
Perth
PH2 0SG
Scotland
01764 684295
Ts250/1 parts. Job lot, wheels, engine cases, cranks, cylinders, heads,tanks, shocks ECT. Collection only. £200 ono all good parts es250 engine disassembled all good £100. Contact Keith at 01209822297 Redruth area. Or email arbkeith@gmail.com
An M reg dismantled Skorpion for sale in the Leyland, Lancashire area. The seller has stored this Skorpion in a dry condition for a friend who went to work abroad over 20 years ago but now wants to get rid of it. He has regularly turned over the engine and kept it well oiled. It will need to be registered but he says he will do it if required but he has been in contact with the DVLA and they have no problems concerning this bike. The seller is not looking for a lot of money just wants it out from under his feet. John Radcliff can be contacted on 01772 463225 if anyone is interested.
This headlamp shell, speedometer, handlebar switch and wiring loom were in a box of parts I bought. I think this is from a 250.£40.00.
I acquired some ETZ parts that I will never use. I think they are 250 bits. They are a set of disc forks. Stanchions look OK. Front wheel including disc. Disc. Disc caliper, master cylinder and lever. All will require refurbishment. £50.00 o.n.o
Message or PM me if interested
I am selling some unused spares. These were bought during a rebuild of my TS250/1 Supa 5 but were not used.
1 complete Powerdynamo 6v to 12v conversion kit (includes full instructions).£140.00
1 new IFA crankshaft and conrod complete with main bearings, crankshaft seals seals and gasket set. £110.00.
Message me on Facebook or p.m. me if interested and I can answer any questions.
.
Changing circumstances mean that I am selling my almost finished project bike. I simply no longer have the time or space. The bike is complete but needs the wiring finished and checked, commissioned and registered.
I bought the incomplete bike as a box of bits in 2013. It was originally registered in UK but subsequently re registered in the Isle of Man. I have the IoM log book which records both registration nos.
I started a full scale rebuild that involved powder coating the frame, rebuilt suspension units with new dampers and springs, rebuilt wheels and new bearings, new tyres, exhaust system and speedo / rev counter instruments. New loom. Other parts too many to list.
As the motor was unknown (but did have good compression) I bought a new crankshaft / con rod, bearings, seals as well as a power dynamo system. However the engine seemed fine when eventually started. Paintwork (done by a previous owner) is good. Loads of other spares. I am looking for£895.00 for the bike. (I have bills for o/£1500) A great project for someone to complete. The bike is 99% complete but requires finishing, commissioning and registering. Complete history of spend and other images available.
E mail or PM me if interested and we can exchange numbers. Happy to answer any questions.
j.mills49@btinternet.com
I have two front 18″ drums and a rear 18″ drum (but looks to be from a 125 (?) as has round lugs and not rectangular one)
I would not recommend you ride on the tyres that are mounted on them at all.
I want them gone, otherwise they’re probably going into the skip.
A tenner a wheel? I’m situated near Hengoed, South Wales.
ES 250/2
Rubber knee grips £6 each
Throttle grip £6
Throttle cable stop & slidey bit (new) £6
handlebar halves £8 each; £15 pair
h’bar centre clamp £10
speedo drive. £3
air filter ( new ) £3
Lock : fits steering or seat £8
bottom engine bracket £2
rubber mounting block (1 only) £4
Tool tray (under seat) £5
ETS 250 Trophy Sport
Metal tank badges £8 each
Martin Grimshaw Peterborough/Kettering
mpgrimshaw25@gmail.com
TS models
Throttle grip and housing £7
Black sidepanel knobs £3 each
Speedo drive (fits in chaincase) £3
Rev counter £10
Speedo mph (used) £10 ; (new)£25
Rear lamp body,bit rusty £5
250 Toolbox door (for seat) £8
250 rubber knee grips £4 each
Dial holders – left or right £5 each
Honda twin-leading-shoe drum brake laced into MZ 18″ alloy rim £50
Martin Grimshaw, Peterborough/Kettering
mpgrimshaw25@gmail.com
For Sale – Let there be Light
7″ headlight glass/reflector for TS Brand new £10
ETZ headlamp shell £6
ETZ headlamp shell/glass/reflector/rim with large amount of wiring loom including light/indicator switch £17
Simson complete headlamp. Make neat custom headlight or sidecar auxiliary light. New £12. Used £10
Pair of amber running lights as fitted to UK ETZs in mid-80s. £8
ES indicators, brand new,boxed £14 pair
Pair of spotlights “Ring” made in DDR Brand new, boxed £12
Single “Ring” spotlight, used £3
Pair of plastic car spotlights. £8
Complete CEV moped headlamp. £4
Old British metal-bodied spotlights “Lumax” and “Butlers” £12 each
Martin Grimshaw, Peterborough
Items can be collected from either Kettering or Peterborough.
mpgrimshaw25@gmail.com
Need to get my TS250 rebored, along with matching piston and rings – can anyone recommend a service provider?
I’m in Leicestershire.
Thanks
GH
MZ ES150 (1975).
V5C. MOT exempt.
Great condition.
Part restored.
New parts fitted—tyres, front shox, indicators, mirrors, rubbers,front light and surround.Polished wheel rims and part powder coated in blue and grey.
Spare 150 engine.
£950.
Please contact for details. Bill 01490 440544 (North Wales).
I am having a garage reorganisation and have a couple of Halfords tool centre’s (Tool chest and cabinet), for sale.
If you go onto the Halfords website they are the ones that retail at £125.
Obviously they are not new and a couple of drawers have a habit of coming off the runners but push back ok, they are red in colour (as all tool boxes should be in my opinion).
Open to offers but thought in the region of £25 each would be fair. (Do a deal if you take the pair).
PM me if interested I live in Sandhurst (Berkshire)
Supa 5 spares for sale
Rear brake pedal £5
Rear wheel rim. £6
Rear wheel/spindle/spacers/brake £20
Rear engine mounts £3
Toolbox door £5
Handlebars £5
Speedometer £10
Top engine mount £5
IFA petrol cap £5
Steering locks: 1 key £6 / 2 keys £9
Petrol tanks, blue or black £25 each
(Rough looking, but complete with chrome panels,knee pads,etc.)
Throttle grip and housing £7
Locking filler cap with 2-stroke measure
(no key, but can be used like a normal cap) £3
Dynamo side engine cover £5
Instrument mounting bracket £5
Chrome air filter cover £4
Spares are in Kettering, could also be picked up in Peterborough
Martin Grimshaw
mpgrimshaw25@gmail.com
This is a latish ETZ125 (electronic ignition) engine. It has the alternator and the electric ignition module but no carb, gear lever of electrics cover. Everything else is present. Just reassembled with new main bearings and seals and gaskets. Rest appears ok. £60 or would prefer to swap for an equivalent TS150 motor.
Peter 01225 763567 or starfield181 at gmail dot com
As I have not used the bike for a year I thought it would be better going to a new home.Have owned the bike since 2005. Used for my commute to London 25 Miles a day.I have now retired.
It’s a 1994 MZ Saxon 500 with a 500cc Rotax engine.
Good points:- stainless exhaust system, Mikuni carb, new battery spare engine bottom end , gasket set 2 oil filters and a clutch cable, starter motor repair kit alarm. – see picture just added
Bad point gear return spring is broken but I have placed an external spring and it still shifts perfectly. Rev counter not working but replaced with a digital one. Will have a years MOT.
£1100 or exchange for a nice 301
Contact: Julian saxontour@gmail.com 07931503895 or 02086630315
Beckenham, Kent
