Markus Ensslin

Forum Replies Created

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • in reply to: TS250/1 18" rear wheel? #10854
    Markus Ensslin
    Participant

    i had a look on mine, it’s e marked, so legal, despite the nhs warnings on the sites …`

    in reply to: TS250/1 18" rear wheel? #10842
    Markus Ensslin
    Participant

    hi, a mitas C-01 3.50-16 is an adequate off-road tyre imho. 10.5 cm wide. just in case you can’t wait for the 18 inch wheel, that is …

    best, max ~:)

    in reply to: Swinging arm bushes #6401
    Markus Ensslin
    Participant

    hi –

    the only way i managed to fit these was using a vice. first insert the rubber outer by about a long 1/4 or a short 1/3, then insert the inner sleeve and press both in.

    g max ~:)

    in reply to: es forks #6366
    Markus Ensslin
    Participant

    hi –

    info on stoye superelastic sidecars here:
    http://www.miraculis.de/aw/mz/mz.html

    –> buecher –> sonstiges –> Ersatzteilliste MZ-Superelastik-Seitenwagen für MZ-Motorrad TS 250/1 & ETZ 250

    max ~:)

    in reply to: Premix?? #4945
    Markus Ensslin
    Participant

    hi –
    1:50 on mineral 2stroke-oil will do…
    i run a 1969 250 engine on 1:50 mineral, too. no problems whatsoever…

    g max ~:)

    in reply to: MZ service tools. #4624
    Markus Ensslin
    Participant

    hello – go here:
    http://miraculis.de/aw/mz/mz.html

    find reparaturhandbuch for your bike/find ‘sonderwerkzeuge’ or ‘spezialwerkzeuge’/follow the links (numbers) for technical drawings.

    hope this helps,

    best, max ~:)

Viewing 6 posts - 1 through 6 (of 6 total)