Greetings pussycats. I’m in the middle of rebuilding an injin from out of my shed and have come unstuck for the want of a detent ball and spring for an etz250. I have rooted through my piles of crap but can’t find any. Has anyone got one they would care to part with?
cheese
There are still limited places left for this camp 3/4/5 December . Book now to avoid disappointment
please see previous post for details
cheese
Greetings chums, does anyone have an etz125 frame they want to part with? I have an engine with no home and fancy making a small trail bike. I have a ts125 frame but don’t want to cut it to fit the later injin
cheese
The delayed and much anticipated winter rally run by Yorkshire section MZ Riders club will be all systems go on 3/4/5 December.
Based in rural Lincolnshire on a small private campsite. There is no pub in the village so an honesty bar will be in operation.
It being a winter rally there will be adequate shelter available and a wood stove to thaw out frozen digits / dry out damp nether garments.
the cost is £35
this includes camping
1 ltr beer
2 x evening meals
2 x breakfast
24 hr tea/ coffee and bisquits
nibbles
bracer on arrival
Food courtesy of the roadkill cafe
Due to limited space prebooking is necessary, please contact me at bynnsi@gmail.com
Still a limited number of places left, book now to avoid disappointment.
Cheese
Greetings all. I’m in the process of converting my outfit to 300. I have a 301 barrel and head ready to be grafted on to my 250 engine . I’m going to use a bvf carb, does anyone know if the jets are different to the 250. And if so what size do I need. Cheese
Now then, greetings chums. I’m on the blag. Does any bod have a center stand for a 251 that they would part with? I fitted a stand from a ts250 to my latest project as I had one in a box. Sadly it touches down at very modest lean angles and is very un nerving. Cheese
Greetings chums, sadly the meet at Ravenseat has had to be cancelled as one of the family has the plague.
now meeting at Brymor ice cream parlour High Jervaulx farm Masham HG44PG 12 bells onward
1975 es150
12 volt power dynamo fitted
british registered with 13000 miles shown
nice bike but no show pony
good starter and reliable
£1200
How do cats n kittens
the September section meet for the Yorkshire section will be at Ravenseat top of Swaledale between Dacre and Kirkby Steven. 12th of the month 12 bells onward.
this is where the Yorkshire shepherdess hangs out, there is a tea van to sell you tea/ coffee and sarnies, and a barn to shelterin should the weather be inclement.
I have emailed to clear the meet with them but had no reply, however when I called earlier in the month I was told to just tip up. So that is what we will do.
be there or be elsewhere!
Oi oi just had a clear out of my lock up and have a lot of old hand tools to move on, mainly screwdrivers/spanners/ sockets. Does any one know of any charities that take old tools to recycle/ reuse in the 3rd world. I find it impossible to throw them away, which it is why they were in the lock up to start with.
by third world I mean Lancashire/ Lincolnshire/wales/Africa
or if anyone fancies a fertiliser sack full of old tools you are welcome to collect.
Oi oi chums, the Yorkshire section meeting for August will be at the Breighton Ferry pub YO86DH near Selby. There is a camp here the weekend of 6/7/8 august and the section meeting will be Sunday lunchtime from 12. I have chosen this venue as most things the Yorkshire section organise tend to be in the West riding. Hopefully this venue will tempt some lads from the eastern bloc to visit.
Any more details contact me or for camping Duncan Kirk
cheese
Oi oi cats n kittens. Julys section meeting will be at The New Inn Appletreewick near Grassington.
There is lots of outside seating with views of the Wharfe valley, also a room we can use if inclement.
Sadly at the minute there is no food available , full range of drinks and nuts/ crisps though. Splendid iscream van just a mile away at Barden bridge.
I won’t be doing a run out this time as I will have been to the camp in Dent and will be calling on my way home. Doesn’t stop anybod else from running one though!.
be there or be elsewhere.
cheese
Bynnzi
Oi oi chums, the Yorkshire section meet will be on 13 June at Ponden Mill cafe from 12.
The cafe has not fully opened after lock down so will only be offering tea and cakes. This isn’t a problem for me as these are in my top 10 favorite things.
I will be running a ride to the meet from The Brown Cow in Bingley BD162QX. Please turn up with full tanks for 10 am depart. Again no sports bikes please as there may be some easy green lanes and depending on who turns up a ford.
any further info please contact me.
cheese
Bynnzi
Greetings badgers,
First post plague section meet will be at Howstean Gorge cafe on 9th May.
there will be a run out to the meet from Bynnzi towers BD162QX meet to depart at 10 am.
old men on slow bikes please,( I will be leading on little stinky) there may be some light green lanes involved. If you want to go to section meeting on a sports bike please make your own way there for 12.
further info please txt me on 07980837005
cheese
Bynnzi
Oi oi chums, I have been bolting together a supa5 during lockdown. The bike came to me in boxes and I have been working through these cleaning and painting.
After getting the rear wheel shot blasted, 
painted and fitting a new tyre imagine my joy when I came to fit it to the bike. It seems that the wheel I have is from a ts125 with brake hub sized for a cable operated brake.
so I need a ts250 rear wheel with the brake hub for the rod operated brake. Does anyone have a spare they wouldn’t mind flogging?
Not bothered about the cosmetics as it will be getting blasted and painted.
cheese
Bynnzi
sorted now thanks
I wrote a detailed description of the bike when I wrote the post but this has disappeared. Redid the description and it pissed off again. So will try here.
1979 supa 5 Historic vehicle so tax and mot exempt
refurbished over lockdown.
tinware including fuel tank powder coated by Triple s
stainless spokes
all fastenings replaced by stainless
replaced fork seals
new chain gaiters
new chrome tank panels and decals
new exhaust and down pipe
new seat cover
12 volt powerdyno
tidy and clean bike starts stops and lights up
wanting £1700
based in Bradford but can transport.
cheese
Oi oi badgers
the section meeting this month has been cancelled for obvious reasons.
called in at Ponden Mill today to speak with the lady who is in charge, we decided between us that with the rule of six and other lockdown restrictions the meeting could not go ahead legally.
i will let people know what is happening next month, but unless restrictions are lifted it is unlikely there will be a November or December meet.
watch this space
cheese
Bynnzi
