Wiring rear brake switch

Forums Technical Two Stroke: Hints and Tips Wiring rear brake switch

Viewing 1 reply thread
  • Author
    • #4735

      Hi members!
      I have recently installed a rear brake switch in the rear drum of my etz250 but I am not sure how it should be wired up, where does the single wire from the switch go?.
      Any help or diagrams would be great!.
      Many thanks

    • #4736
      ‘AAA Dummy

      Hi paul, looking in my Haynes manual it shows the rear brake switch wire connecting to terminal 8 on a wiring block attached to the frame, I would guess this terminal block is under the seat. The block has eight connectors on it so should be easy to find, I’m only going on what I’ve looked up as my Kanuni brake switch attaches to the brake rod near the battery. Hope this helps cheers Steve.

Viewing 1 reply thread
  • You must be logged in to reply to this topic.