TS125 Dynamo removal

Forums Technical Two Stroke: Help needed TS125 Dynamo removal

Viewing 2 reply threads
  • Author
    • #11723
      A A A Dummy

      Hi all,

      I am about to strip down the engine on my 1977 TS125, according to various sources using an M10 bolt will remove the dynamo, other sources say it has a fine tread.

      Can anyone tell me if it is a standard M10 1.50 pitch thread or a 1.25 pitch thread.

    • #11773
      Peter Fielding

      Standard 1.5mm pitch 10mm bolt will do the trick. Needs to be quite long – about 70mm at a guess A fine thread is used on the 7mm bolt which secures the points cam and stator to the crankshaft.

    • #11774
      A A A Dummy

      Thanks Peter, I carefully tried a std 1.5mm threaded bolt and it has done the trick.

Viewing 2 reply threads
  • You must be logged in to reply to this topic.