ES 125/1 Cable and wire routing

› Forums › Technical › Two Stroke: Help needed › ES 125/1 Cable and wire routing

Viewing 4 reply threads
  • Author
    Posts
    • March 19, 2020 at 7:25 pm #12498
      Neil Wisbeach
      Participant

      Evening everybody!

      I am currently assisting a friend renovate a 1970 ES 125/1 and due to the fiddly nature of the headlight positioning, has anyone got any hints or tips for routing the electrical wiring/front brake/choke/throttle/clutch (which side etc?)

      Any information will be greatly appreciated!

      Kind regards, Neil

    • March 20, 2020 at 9:08 pm #12501
      Derek Reynolds
      Participant

      I’ll have a look tomorrow Neil, maybe take some pictures.

    • March 21, 2020 at 1:26 pm #12504
      Neil Wisbeach
      Participant

      Hi Derek

      Many thanks!

      Regards, Neil

    • March 22, 2020 at 12:30 pm #12505
      Derek Reynolds
      Participant

      Lets see if this works:

      Yay! It does. Click on each to get a bigger picture.
      The inside of the headlamp is out of focus, but shows little of great importance. Hope this helps.

      MZ-ES125-1-004-Medium MZ-ES125-1-005-Medium MZ-ES125-1-007-Medium MZ-ES125-1-009-Medium MZ-ES125-1-008-Medium MZ-steering-002-Medium MZ-ES125-1-002-Medium

    • March 22, 2020 at 7:01 pm #12511
      Neil Wisbeach
      Participant

      Hi Derek

      Many, many thanks for the pictures. These will be enormously helpful!

      Kind regards, Neil

  • Author
    Posts
Viewing 4 reply threads
  • You must be logged in to reply to this topic.