cold start slide

This topic has 1 reply, 2 voices, and was last updated 7 years, 1 month ago by Derek Reynolds.

Viewing 1 reply thread

Author

Posts
- July 15, 2017 at 12:06 pm #9006
  
  Duncan Kirk
  Participant
  
  Should the rubber on bottom of the cold start slide ne flush with the bottom of the slide or protrude slightly
- July 15, 2017 at 4:16 pm #9007
  
  Derek Reynolds
  Participant
  
  I suspect there should be, though you don’t say which model or carb you refer to.
  Have a look here:
  http://www.themzshop.co.uk/product/rubber-disc-for-choke-plunger/
Author

Posts

Viewing 1 reply thread

You must be logged in to reply to this topic.