› Forums › Technical › Two Stroke: Help needed › Mixing 2T Oil › Reply To: Mixing 2T Oil
January 15, 2018 at 4:17 pm
#9677
‘AAA Dummy
Member
Yes, I had this problem once refuelling a Yamaha yz250. It was virtually empty, i didn’t turn off the petrol tap, and I put the oil in first on its own. I then put the petrol in from the pump and gave the bike a shake to mix it up, but it wouldn’t start as the oil had gone straight into the petrol tap. What I do now is turn off petrol tap, put in half the petrol then all the oil then the rest of the petrol, put cap on, and give it a good shake. I haven’t had a problem doing it this way on my mz